Company Products wolkingbeam
Company Products wolkingbeam
Suitable for MIM products such as stainless steel, hard alloy, etc;
Walking beam type transmission structure, large unit time output, high production efficiency, more suitable for large-scale continuous production;
Basic parameter
| Molybdenum boat size (mm) | W330/L330 |
| Maximum assembly height (mm) | 90mm |
| Circulating amount of sintered 17-4PH (boat / hour) | 4~6 |
| Recommended sintering time | 1h+ |
| Recommended number of materials for use | 80 个 |
| Land requirement (M 2) | 约 23×3 |
| Number of heating zone in preheating zone | 5×30kW |
| Number of heating zone in sintering section | 3×40kW |
| Section section section | 5m+ fast cooling + mesh belt drive and rotation |
| Tail gas combustion device | 2 sets (synchronous operation) |
| The maximum temperature of the residual binder | 800℃ |
| Maximum sintering temperature | 1500℃ |
| Process gas consumption (N 2, H 2 or its mixture) | 25 m3/h |
| Nitrogen gas purification and sealing chamber | 13 m3/h |
| Power consumption | 45 kWh |
| Cooling water consumption | 3 m3/h |
| Power / other voltage should be required | 3×400V / 50 或 60Hz |
| Installed power | 300kW |
2021. All rights reserved. Shenzhen SinterZone Technology Co., Ltd. Guangdong ICP No. 13022004